Amazon. UK are currently stocking Neoprene padded cases ranging from about £6.00
Just put 7inch tablet cases in the search
Sent from my Scroll Tablet using Tapatalk
 |
|
Scroll Tablet PC | Scroll Excel Tablet Forum
Help, Advice, Upgrades & Reviews for the Scroll Excel & Scroll Tablet PC
- Board index ‹ Older Scroll Tablets - 7" Resistive, Capacitive, miScroll, Essentials ‹ Discuss the Screen, Form Factor, Connectivity, WiFi & Accessories ‹ Scroll Accessories
- Change font size
- Print view
Neoprene Cases
25 posts
• Page 1 of 3 • 1, 2, 3
Neoprene Cases
by Fozzer » January 27th, 2011, 7:45 pm
- Fozzer
- Scroll Addict
- Posts: 130
- Joined: January 3rd, 2011, 6:30 am
Re: Neoprene Cases
by brianzion » January 27th, 2011, 9:01 pm
thanks for the post i like this one £9.47 Delivered FREE in the UK http://www.amazon.co.uk/AmazonBasics-Ne ... 763&sr=8-3
room for other bits and bobs
You do not have the required permissions to view the files attached to this post.
Best regards brian.
android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01
Be as smart as you can, but remember that it is always better to be wise than to be smart.
android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01
Be as smart as you can, but remember that it is always better to be wise than to be smart.
-
brianzion - Scroll Master
- Posts: 308
- Joined: January 14th, 2011, 2:03 pm
- Location: Milton Keynes
Re: Neoprene Cases
by Charlie » January 27th, 2011, 9:25 pm
@brianzion
That does look like a nice case - but your scroll will slide around in it though.
That does look like a nice case - but your scroll will slide around in it though.
" Just because you could, doesn't mean you should. "
-
Charlie - Trusted Developer
- Posts: 2471
- Joined: December 28th, 2010, 8:41 pm
- Location: UK
- Real Name: Charlie
- Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)
Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.
Re: Neoprene Cases
by brianzion » January 27th, 2011, 9:32 pm
@charlie i have the case with the keyboard already i was thinking it would give it extra protection 
Best regards brian.
android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01
Be as smart as you can, but remember that it is always better to be wise than to be smart.
android 2.1 update 1
linux Kernel: 2.6.29
Firmware: v1.01
Baseband version v1.01
Be as smart as you can, but remember that it is always better to be wise than to be smart.
-
brianzion - Scroll Master
- Posts: 308
- Joined: January 14th, 2011, 2:03 pm
- Location: Milton Keynes
Re: Neoprene Cases
by Charlie » January 27th, 2011, 10:02 pm
brianzion wrote:@charlie i have the case with the keyboard already i was thinking it would give it extra protection
Oh i see - that would fit nicely. Nice idea, if using for the scroll and keyboard/case + you would have space for some accessories in the front pocket.
" Just because you could, doesn't mean you should. "
-
Charlie - Trusted Developer
- Posts: 2471
- Joined: December 28th, 2010, 8:41 pm
- Location: UK
- Real Name: Charlie
- Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)
Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.
Re: Neoprene Cases
by samtheeagle » January 27th, 2011, 10:07 pm
I've ordered a square of neoprene off eBay so I can make my own sleve that's a perfect fit. That's the plan anyway...
Scroll v1.01, rooted, clockworkmod, custom build.prop, PMT apps disabled.
HTC Desire
HTC Desire
-
samtheeagle - Scroll Sergeant
- Posts: 68
- Joined: January 14th, 2011, 3:06 pm
Re: Neoprene Cases
by Charlie » January 27th, 2011, 10:30 pm
samtheeagle wrote:I've ordered a square of neoprene off eBay so I can make my own sleve that's a perfect fit. That's the plan anyway...
You fancy making a few? I would buy one off you.
" Just because you could, doesn't mean you should. "
-
Charlie - Trusted Developer
- Posts: 2471
- Joined: December 28th, 2010, 8:41 pm
- Location: UK
- Real Name: Charlie
- Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)
Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.
Re: Neoprene Cases
by mojo » January 27th, 2011, 10:47 pm
i got one of these from maplins at the same time as my scroll, got a tenner off too!
http://www.maplin.co.uk/caselogic-12.1i ... own-396523
the scroll fits nicely inside the inner pocket with room for the earphone adapter to be left attached, and theres loads of room inside for everything else, charger and accessory cables, external HDD, mini usb keyboard, as well as my lunch
http://www.maplin.co.uk/caselogic-12.1i ... own-396523
the scroll fits nicely inside the inner pocket with room for the earphone adapter to be left attached, and theres loads of room inside for everything else, charger and accessory cables, external HDD, mini usb keyboard, as well as my lunch
'Rooted', 'propped' and 'stripped' -but still scared of terminal F/W V 1.01_Bb V 1.01 K 2.6.29_Android 2.1 32GB & non-Working Market :-/
HTC Desire HD: Rooted, ENG-OFF, S-OFF, IceColdSandwich AKOP 7.4 Stripper edition, O/C@1.5ghz, 16GB Class 10
HTC Desire HD: Rooted, ENG-OFF, S-OFF, IceColdSandwich AKOP 7.4 Stripper edition, O/C@1.5ghz, 16GB Class 10
-
mojo - Scroll Addict
- Posts: 160
- Joined: January 24th, 2011, 4:40 pm
- Location: In Ur hEad, steelin' uR lOlz
Re: Neoprene Cases
by samtheeagle » January 28th, 2011, 8:25 am
charlie wrote:You fancy making a few? I would buy one off you.
Let's see if I can make one first!
It's a 30x30cm square, so it should just be big enough to fold over and stitch up one side and then turn inside out for neatness. I think. There are lots of great looking cases out there, but I want something really snug that the scroll wont rattle around in, and that isn't huge. The scroll is supposed to be a super portable device, so I don't want the case making it all bulky in my bag.
Scroll v1.01, rooted, clockworkmod, custom build.prop, PMT apps disabled.
HTC Desire
HTC Desire
-
samtheeagle - Scroll Sergeant
- Posts: 68
- Joined: January 14th, 2011, 3:06 pm
Re: Neoprene Cases
by samtheeagle » January 30th, 2011, 12:12 pm
Soooo, apparently neoprene is a real sod to put through a sewing machine! It's stretchy, as well as rubbery. So it wont feed through the machine easily, and it's really hard to get a straight line of stitching! 
Fortunately my lovely wife took over before I seriously injured myself, and managed to knock up just the kind of thing I was after. Very simple, nice and thin, but affording some basic protection to the scroll. I went for a nice simple tuck in flap rather than fuss about with velcro or poppers.
Fortunately my lovely wife took over before I seriously injured myself, and managed to knock up just the kind of thing I was after. Very simple, nice and thin, but affording some basic protection to the scroll. I went for a nice simple tuck in flap rather than fuss about with velcro or poppers.
You do not have the required permissions to view the files attached to this post.
Scroll v1.01, rooted, clockworkmod, custom build.prop, PMT apps disabled.
HTC Desire
HTC Desire
-
samtheeagle - Scroll Sergeant
- Posts: 68
- Joined: January 14th, 2011, 3:06 pm
25 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 2 guests